Travertino Navona White for Calm, Cohesive Interiors

This large-format surface interprets vein-cut Italian travertine with pale ivory bands and restrained linear movement. Its quiet appearance works across contemporary kitchens, hospitality walls and fitted furniture without overwhelming adjacent materials.

Horizontal direction is the defining design feature. Slab orientation, joint positions and visible edges should therefore be coordinated before fabrication.

Large formatUp to 3240 × 1620 mm

Thickness6 mm / 12 mm

Surface referenceHammered

Read the Whole Slab Before Cutting

The face combines soft horizontal bands, small mineral openings and gentle tonal changes. Reviewing both the complete face and a close sample helps buyers judge scale, direction and texture.

Balanced Long-Range Movement

The broad face remains visually light while the bands provide enough direction to organize an island, vanity or full-height wall.

Subtle Texture at Close Range

Fine grooves and porous-looking marks reproduce the character of cut travertine. Confirm a physical sample when surface feel and light reflection are important.

Plan Vein Direction Across Multiple Panels

For long walls and cabinet runs, position the horizontal bands at compatible heights and keep joint widths consistent. The layout below illustrates consecutive visual flow rather than mirrored bookmatching.

Set Orientation

Mark the required horizontal direction on approved drawings.

Locate Joints

Coordinate seams with cabinetry, corners and openings.

Approve Faces

Review current slab photos before final nesting.

A Natural Partner for Timber and Dark Metal

The pale mineral palette softens large kitchen volumes, while the directional pattern gives islands and splashbacks a clear architectural line.

Reference Specifications

Material	Large-format sintered stone / porcelain slab
Nominal formats	3240 × 1620 mm and 3200 × 1600 mm
Thickness options	6 mm and 12 mm
Finish reference	Hammered surface
Pattern direction	Predominantly horizontal vein-cut appearance
Common uses	Worktops, tables, walls, vanities and furniture panels

Confirm available size, thickness, finish, batch tone and fabrication details against the quotation and approved sample.

Shipment Preparation

Selected faces can be recorded before loading, protected at contact points and secured on reinforced frames. Packing arrangements are matched to the shipment plan and destination.

Frequently Asked Questions

Key points to settle before sample approval and fabrication.

Is this a high-contrast pattern?

No. The design is intentionally quiet, using closely related ivory and beige tones with fine horizontal movement.

Should every panel face the same direction?

Usually yes for a continuous run. Mark the chosen orientation on the shop drawing before cutting begins.

Can it be used for countertops?

The surface is suitable for worktops and furniture applications when the selected thickness, support and edge details follow the approved fabrication plan.