Dark Mineral Character from Face to Edge

Basalt Black full body sintered stone slab has a warm charcoal-black base with fine mineral particles and restrained tonal movement.

The coordinated dark body keeps exposed cuts, bevels and routed details visually closer to the satin face, making the material suitable for countertops, tables, wall panels and architectural features.

Slab Options

Large Format with Two Structural Thicknesses

The 3200 × 1600 mm format provides useful coverage for large worktops and cladding panels. Twelve millimetres suits many standard fabrication tasks, while 20 mm provides a more substantial edge and additional material for selected profiles.

Slab Size 3200 × 1600 mm

Thicknesses 12 / 20 mm

Finish Satin

Appearance Warm charcoal black

Through-Body Detail

Better Visual Continuity on Finished Edges

The body is formulated in a dark tone that coordinates with the surface. This reduces the sharp color change often seen when a dark surface graphic is printed over a light body.

Suitable for exposed straight and bevelled edges
Useful for routed grooves and recessed details
Fine basalt-like particles instead of marble veins
Low-sheen satin surface for controlled reflection

Fabrication Options

One Material for Multiple Finished Components

Rectangular panels, countertop strips, table tops, bevelled edges and grooved components can be planned from the same slab batch. Approved drawings should state finished dimensions, edge profiles, cutouts, hole positions and surface orientation.

Full-body scope: the coordinated body improves color continuity at cuts and edges. It does not mean every internal particle or deep machined detail will reproduce the surface texture exactly.

basalt-black-fabrication-pieces-1200x600

Application Range

A Neutral Dark Surface for Interior and Exterior Design

Basalt Black can be considered for kitchen worktops, covered outdoor kitchens, bar counters, tables, wall cladding and coordinated architectural elements.

For exterior or heat-exposed projects, confirm the slab specification, substrate, joints, fixing method and local installation requirements before fabrication.

Batch Control and Packing

Inspect Color, Edges and Finished Parts Together

Quality checks can cover slab dimensions, flatness, surface consistency, edge color, fabrication details and finished-piece measurements. Protective separation, corner guards and reinforced timber A-frames help reduce damage during export handling.

Provide drawings, thickness, finish, quantity, application and destination so production and packing can be reviewed as one project.

Discuss Your Basalt Black Project

Send the application, finished sizes, edge details, thickness, quantity and destination for a practical slab and fabrication recommendation.

Get a Recommendation & Quote

Frequently Asked Questions

Basalt Black Full Body Slab Questions

What does full body mean for this slab?

It means the slab body has a dark color coordinated with the face, helping exposed cuts and edges look more consistent than a light-bodied slab.

Does the internal texture exactly match the face?

No. Body color is coordinated, but deep machining does not reproduce every surface particle or texture exactly. Approve an edge sample for critical details.

Which thickness should I choose?

Twelve millimetres suits many standard components. Twenty millimetres provides a more substantial profile. The final choice depends on span, support, edge design and application.

Can the slab be used outdoors?

It can be considered for suitable exterior projects. Confirm the current technical documents, fixing system, substrate, joints and local conditions before approval.